Maintenance of automatic weightlessness feeder
First, when the automatic weightlessness feeder is running, it is better not to put anything on it, which will easily lead to excessive pressure on the motor and burn it.
Two, check whether the belt is intact and whether there is any loosening. Feeding machine is relying on the belt to transfer materials, only the normal belt can give full play to the production performance of the machine, the workload can reach the maximum.
Because all the parts of the feeder are connected by gears and chains, the gears and chains must be made to ensure maximum lubrication, so that the machine will not be damaged because of lack of lubrication.
Fourth, because the production of automatic weightlessness feeder will produce a lot of dust, will make the feeder control box accumulated a lot of dust, dust will make the internal circuit short circuit, damage electrical circuits and other components, so every other period of time to clean up the control box dust.
Fifth, the main power of the automatic weightlessness feeder is the motor, the motor has power motor and deceleration motor (because the motor speed is very high, so in the transmission of power with the deceleration motor to decelerate). When using, check whether the power motor and the decelerating motor are abnormal. The motor must be maintained at the right time, for example, gear oil on the gear of the reducer.